Minimal Back Coverage
A lightweight plate for the rear of iPhone Air, without a side frame.
Product Features
Description
ZEERA MagSkin Air | Ultra-Thin Magnetic Back Plate
MagSafe Functionality. Almost No Bulk.
ZEERA MagSkin Air is a 1.1mm ultra-thin PC magnetic back plate for iPhone Air, weighing approximately 13.5g. Its built-in magnetic array supports MagSafe accessory alignment, with an adhesive backing for a firmer attachment to the phone.
Designed for people who prefer the feel of a bare phone, it adds a slim magnetic attachment surface without surrounding the edges with a traditional case.
1.1mm Slim Profile
Low-profile PC plate, approximately 13.5g.
MagSafe Accessory Alignment
Built-in magnetic array for compatible chargers, wallets and mounts.
Optional Adhesive Attachment
Use the rear adhesive when you want a firmer plate-to-phone connection.
Designed for iPhone Air
A Magnetic Back Plate, Not a Bulky Case.
MagSkin Air gives iPhone Air a slim magnetic accessory surface while leaving the phone's sides uncovered. Made from PC with an integrated magnetic array, it is designed for people who want less material between their phone and their daily accessories.
Unlike a full protective case, this plate does not wrap around the phone's sides or corners. Choose it for a minimalist setup rather than all-around drop protection.
Accessory-Focused Design
Designed around compatible magnetic chargers, wallets and mounts.
Slim by Design
1.1mm Thin. Approximately 13.5g.
The PC magnetic plate measures 121.5 × 70.5 × 1.1mm and weighs approximately 13.5g. Its thin form keeps the phone's original silhouette more visible than a conventional full-coverage case.
Integrated Magnetic Array
Made for Magnetic Accessory Alignment.
The built-in magnetic array helps compatible MagSafe accessories locate the plate and align for everyday attachment. The actual hold depends on the accessory, the mounting surface and whether the plate's adhesive is used.
Built-In Magnets
Support positioning of compatible magnetic accessories.
Adhesive When Needed
Use the adhesive backing for extra plate-to-phone attachment security.
MagSafe Accessory Compatibility
Designed for Your Everyday Accessories.
MagSkin Air is designed for use with compatible MagSafe chargers, magnetic car mounts and wallets. Check fit and charging performance with your particular setup after installation; accessory shapes and magnetic strength can vary.
A More Even Contact Surface
A Slimmer Surface for Select Setups.
By adding a flat area to the back of the phone, MagSkin Air can provide more even contact with certain magnetic accessories and tabletop setups. It does not remove every cause of phone wobble, including camera-bump height or uneven desks.
Made for Daily MagSafe Use
Chargers. Mounts. Wallets.
One low-profile magnetic back plate supports everyday accessory positioning, whether you charge at your desk, attach a compatible wallet, or use a car mount. Use the adhesive backing for a firmer attachment when accessories are attached and removed often.
Charging
Helps position compatible magnetic wireless chargers.
Mounts
Use the adhesive for more secure plate-to-phone attachment.
Wallets & Accessories
A slim contact area for compatible magnetic accessories.
Installation Guide
Four Steps to a Clean Fit.
Install the back plate carefully so that no dirt or grit is trapped against the phone. If you plan to use it frequently with mounts, the adhesive is recommended for added attachment security.
01 · Clean & Dry
Remove dust, oil and debris from the back of your iPhone Air.
02 · Choose the Adhesive
Leave the protective liner on while checking the position, or peel it off to apply the adhesive for a firmer hold.
03 · Align the Plate
Position MagSkin Air evenly on the rear surface before fixing it in place.
04 · Press Evenly
If using adhesive, press gently across the plate to help it attach securely.
Usage tip: For repeated mounting on compatible car mounts, tripods, bike mounts or magnetic rings, use the adhesive layer and check the connection before use. Keeping the adhesive liner on is suitable for checking position, not a guarantee of secure mounting.
Know What You Are Choosing
MagSkin Air vs. a Full Phone Case.
A traditional protective case may surround the sides and corners of your phone. MagSkin Air prioritizes a slim magnetic back surface instead. It is made for accessory convenience and a minimal feel, not as a substitute for drop protection.
Traditional Full Case
Typically adds side and corner coverage, along with additional material.
ZEERA MagSkin Air
Thin PC magnetic plate, without a surrounding side frame.
Coverage & Fit
A Purpose-Built Magnetic Plate.
MagSkin Air is slightly smaller than the full rear face of the phone, with an approximately 0.9mm inset margin. It has no side frame and is described as compatible with Apple's iPhone Air Bumper.
Magnetic Back Plate
Not a full protective case.
No Side-Frame Coverage
The phone's side edges remain exposed.
0.9mm Approximate Inset
The plate sits slightly within the rear perimeter.
Bumper-Friendly Fit
Designed to work alongside Apple's iPhone Air Bumper; check individual fit.
Product Specifications
MagSkin Air at a Glance.
Device
iPhone Air
Product Type
Ultra-thin magnetic back plate
Material
PC + magnetic array
Weight
Approx. 13.5g
Dimensions
121.5 × 70.5 × 1.1mm
MagSafe
Compatible accessories
Attachment
Magnetic plate with adhesive backing
Coverage
Rear plate, no side frame
Inset Margin
Approx. 0.9mm
Before use: Keep dust and grit away from the contact surfaces. For frequent mounting, follow the adhesive installation instructions and check that both the plate and mount are secure.
Care & Removal
Remove Slowly. Store Carefully.
Lift from an Edge
Carefully ease the plate up from the edge using your fingernail.
Use Gentle Warmth If Needed
A little warmth may help loosen the adhesive. Avoid excessive heat or force.
Protect the Adhesive
Cover the exposed adhesive with its original protective liner for storage.
Note: Adhesion may become weaker after repeated removal and reattachment. Do not force the plate off if it does not release easily.
Frequently Asked Questions
Get to Know MagSkin Air.
Is MagSkin Air a protective iPhone case?
No. MagSkin Air is a slim magnetic back plate. It does not have a surrounding frame for edge or corner protection.
Does MagSkin Air support MagSafe accessories?
It is designed for compatible MagSafe chargers, magnetic wallets and mounts. Compatibility and magnetic hold depend on the accessory and setup.
Will it change wireless charging speed?
No specific charging-speed improvement or guaranteed wattage is claimed. Check that your charger aligns and charges normally after installation.
Do I need to use the adhesive?
The adhesive provides a firmer attachment to the phone. It is recommended for frequent mounting or accessory changes; test the fit before use.
Will it eliminate camera wobble?
Not necessarily. It can make the rear contact area more even in some setups, but camera-bump height and uneven surfaces can still cause wobble.
What are the dimensions and weight?
MagSkin Air measures 121.5 × 70.5 × 1.1mm and weighs approximately 13.5g.
Can I remove and reuse it?
Remove it gently from an edge. The adhesive can lose grip after repeated use; protect it with the original liner during storage.
ZEERA MagSkin Air for iPhone Air
Keep the Slim Feel. Add Magnetic Convenience.
Choose MagSkin Air for an ultra-thin 1.1mm PC magnetic back plate with approximately 13.5g weight, compatibility with MagSafe accessories and an adhesive option for a firmer fit. It is a focused alternative to a full case when low-profile magnetic access matters most.
Payment Method
Payment Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
