Duodometer 1.1 Tracks iPhone Duo Battery History. What Do the Two Cell Readings Mean?

Quick Answer

Duodometer 1.1 adds Background App Refresh to improve iPhone Duo battery history and charge and drain estimates. The app gets one combined battery percentage from iOS and uses the rated capacity of each cell to estimate its remaining charge. Those two figures can differ simply because the cells are different sizes. They cannot establish that either cell is failing or that the two are out of balance. Use the history to see how quickly your phone gained or lost charge over a recorded interval. For battery condition and individual battery details, open Settings → Battery → Battery Health. Duodometer release notes and Apple’s battery guide.

What changed in Duodometer 1.1?

Version 1.1 lets Duodometer take additional battery samples when iOS gives it time to refresh in the background. That can fill in some of the gaps between app opens, which helps the history chart capture changes during a charge or when the phone is idle. iOS decides when to run background tasks, so samples can still be unevenly spaced. Version 1.1 on the App Store and Apple’s background task documentation.

To give the app a chance to sample between opens, check Settings → General → Background App Refresh and enable it for Duodometer if it appears there. If you close the app from the App Switcher, open it again before expecting more background samples. Apple’s Background App Refresh guidance.

Why do the two cells show different mAh?

Developer Colin Morgan says Duodometer applies the same combined iOS percentage to both rated capacities. The app uses 2,962 mAh for the main cell and 1,921 mAh for the cover cell. The larger cell accounts for about 61% of the 4,883 mAh rated total. That split describes cell sizes. The remaining-charge estimates scale with those sizes. The developer’s explanation and ZEERA’s guide to the 4,883 mAh rating.

Example at 50% combined charge

  • Main cell estimate · 2,962 mAh × 50% = 1,481 mAh
  • Cover cell estimate · 1,921 mAh × 50% ≈ 961 mAh

Both estimates start from the same 50% reading. The difference comes from the rated sizes alone. The calculation has no separate reading that could show how much charge each cell actually holds.

How to read the charge and drain rates

Duodometer estimates how fast the phone gained or lost charge from the change in combined percentage between samples. If the level rises from 30% to 42% in 30 minutes, the gain is 12 percentage points and the average rate for that interval is 24 percentage points per hour. Charger wattage requires a separate measurement. ZEERA’s iPhone Duo wired and MagSafe charging comparison.

  • Comparing chargers. Use the same starting charge range and similar screen activity and temperature. Compare how many percentage points the phone gains over the same length of time.
  • Investigating drain. Find the period when the level dropped, then open Settings → Battery → View All Battery Usage to see which apps or system activities ran that day.
  • Interpreting a long gap. Read the change as an average across the interval. Two samples leave the timing of any short burst of drain or charging uncertain.

Where to check the health of both iPhone Duo batteries

Open Settings → Battery → Battery Health. Apple says Battery Health reports the condition of the battery system and shows details for each battery. Those details may differ slightly with normal use. If you’re investigating repeat shutdowns or a service recommendation, use the system information and the symptoms you observed when contacting Apple Support. Apple’s iPhone battery usage and health guide.

Related Reading

Duodometer FAQ

Will I lose my Duodometer battery history if I delete the app?

Yes. The developer says Duodometer keeps its history on your iPhone and deletes it when you delete the app. Duodometer’s App Store listing.

ZEERA WIRELESS
Guichang Chen · ✓ Verified
Apple Supply Chain & Product Development Specialist
Guichang Chen has over 10 years of experience in consumer electronics, with hands-on involvement in Apple accessory development, manufacturing, and supply-chain operations. At ZEERA, he combines industry experience with technical research, product testing, and supply-chain verification.
⚠️ Reposting Notice: Please properly credit Guichang Chen · ZEERA WIRELESS when sharing or republishing this article.

Оставить комментарий